Joined
·
941 Posts
So we have been waiting and waiting for a plug-n-play, OEM Fit Clear Tail Light with Integrated Turn Signals.
And finally, Competition Werkes has released it.
The pictures don't do it justice. Honestly, they don't.
It really looks good in person. Specially on the bike.
Perfect Fit.
The Tail Light comes with OEM Plug for the Running/Brake Light.
And of course 2 extra bare wires for the Turn Signals.... (1 Hot Left, and 1 Hot Right).
They come with SQUARE Metal ends, exactly like FRONT signals.
But, the REAR use Circle Bullet ends.
The Square can be just plug and play into the Round OEM Harness. But, you need to secure them.
OR, you can reuse the OEM Bullet Ends from the Rear Signals.
Or
You can Quick Splice tap the wires.
or
You can more permenent with Solder.
There is basically 4 different ways to skin this cat. ;-)
Since we already had the Hotbodies Undertail/FE Kit connected, we just tapped into those wires, and done.
Here are some Photos showing lots of different frames
One thing to note.
No matter how much background light we had or didn't have, the camera could not ACCURATELY Show you how bright the turn signals are. Specially with the Brake Light on.
IN PERSON.............. You can clearly see the Turn Signals, EVEN when the brake light is on. It's pretty impressive.
They are offered in CLEAR / RED / SMOKE
For More Details Click here >> GROM Integrated Tail Light <<
.
OEM Taillight on the LEFT / COMP WERKES ON THE RIGHT
Running Light ONLY
BRAKE LIGHT Activated
BLACK TAPE OVER The Hotbodies LED Signals
Clear Tail Light shown as well as the Hotbodies Undertail/FE KIT LED Signals
Clear Tail Light shown as well as the Hotbodies Undertail/FE KIT LED Signals
.
.
.
And finally, Competition Werkes has released it.
The pictures don't do it justice. Honestly, they don't.
It really looks good in person. Specially on the bike.
Perfect Fit.
The Tail Light comes with OEM Plug for the Running/Brake Light.
And of course 2 extra bare wires for the Turn Signals.... (1 Hot Left, and 1 Hot Right).
They come with SQUARE Metal ends, exactly like FRONT signals.
But, the REAR use Circle Bullet ends.
The Square can be just plug and play into the Round OEM Harness. But, you need to secure them.
OR, you can reuse the OEM Bullet Ends from the Rear Signals.
Or
You can Quick Splice tap the wires.
or
You can more permenent with Solder.
There is basically 4 different ways to skin this cat. ;-)
Since we already had the Hotbodies Undertail/FE Kit connected, we just tapped into those wires, and done.
Here are some Photos showing lots of different frames
One thing to note.
No matter how much background light we had or didn't have, the camera could not ACCURATELY Show you how bright the turn signals are. Specially with the Brake Light on.
IN PERSON.............. You can clearly see the Turn Signals, EVEN when the brake light is on. It's pretty impressive.
They are offered in CLEAR / RED / SMOKE
For More Details Click here >> GROM Integrated Tail Light <<

.

OEM Taillight on the LEFT / COMP WERKES ON THE RIGHT



Running Light ONLY

BRAKE LIGHT Activated

BLACK TAPE OVER The Hotbodies LED Signals

Clear Tail Light shown as well as the Hotbodies Undertail/FE KIT LED Signals

Clear Tail Light shown as well as the Hotbodies Undertail/FE KIT LED Signals
.
.
.