GromForum.com banner

1 - 20 of 21 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #1
Sorry if this is a repost but how do you guys feel about fitting a oil cooler to the grom? Any thoughts or opinions?

Thanks
 

·
Premium Member
Joined
·
719 Posts

·
Registered
Joined
·
21 Posts
Discussion Starter #5
If a big bore kit is installed, do you think it might be needed? I imagine small kits no, but maybe some of your bigger kits yes?
 

·
Registered
Joined
·
1,621 Posts
Id assume even with the small kits there is no harm in having the oil run cooler. It also depends what you are doing with it. If you are tracking the GROM it's a good idea.
 

·
Registered
Joined
·
10 Posts
Oil cooler will always be beneficial if you are beating it hard. Heat can degrade even some of the most high tech oils very fast. The Oil cooler can help with the longevity of motor oil and subsequently the motor
 

·
Registered
Joined
·
1,621 Posts
Lower oil temps also better for engine.
 

·
Premium Member
Joined
·
703 Posts
Not a common mod people think about but is definitely beneficial.
 

·
Registered
Joined
·
10 Posts
Oil cooler will always be beneficial if you are beating it hard. Heat can degrade even some of the most high tech oils very fast. The Oil cooler can help with the longevity of motor oil and subsequently the motor
+1 to this!
 

·
Registered
Joined
·
11 Posts
I've put coolers on all my Z50 and XR100 race bikes. they do help on air cooled motors. It can lower temp as much as 30-40 degrees.
 

·
Registered
Joined
·
1,621 Posts
plus more volume of oil means more volume to carry and dissipate heat!
 

·
Registered
Joined
·
327 Posts
It's 112 in Vegas right now. An oil cooler would be helpful. :(
 

·
Registered
Joined
·
1,621 Posts
I'd like to see a photo of the MSX with an oil cooler.
 
1 - 20 of 21 Posts
Top